Vibrating feeder is an indispensable equipment in all kinds of metallurgy, coal material production line, its continuous and uniform feeding, is widely used in metallurgy, mineral processing, chemical industry, loading station and other industries.
Vibrating feeder in the production of lumpy or granular materials can be uniformly and continuously sent to the receiving equipment, is the first process of the entire production line. It is the first process of the whole production line. After that, it often crushes with jaw crusher, and the working efficiency of vibrating feeder not only has an important influence on the capacity of jaw crusher, but also has an influence on the production efficiency of the whole production line.
The feeding speed and discharging speed of vibrating feeder have a direct impact on the efficiency of the whole production line.
The following share the reasons for the slow feeding of vibrating feeder.
1. Chute inclination is not enough
Solution: Adjust the installation angle. According to the site conditions, choose to pad up/down the fixed position of the two ends of the feeder.
2. The angle of the eccentric block at both ends of the vibrating motor is not consistent
Solution: Adjust by checking whether the two vibration motors are consistent.
3. Vibration motor vibration direction is consistent
Solution: Adjust the wiring of any one of the vibration motors to ensure that the two motors are running in reverse to ensure that the vibrating feeder vibration trajectory is straight.
4. Vibration motor excitation force is not enough
Solution: Can be adjusted by adjusting the position of the eccentric bl
