Hollow core brick making machine takes cement, river sand, cinder, ceramic granule, ore and so on as raw materials, and the molded bricks have the advantages of load-bearing, filling, heat preservation, heat insulation, low cost, not easy to weather and so on, which not only can save energy, land and resources, but also can turn waste into treasure.
No-burn hollow brick making machine is designed on the basis of absorbing the characteristics of similar models at home and abroad, the degree of automation, product quality and good hollow block production equipment.
Equipment features
1. The upper press head adopts double oil cylinders design, the pressure balance is even, which improves the compressive and flexural strength of the product.
2. Material storage and distribution device avoids part of the concrete liquefied in advance, reduces the refilling time, reduces the difficulty of refilling, and the product strength error is small, adopts closed belt conveying, and strictly controls the storage of small hopper to ensure the simultaneous conveying and use of materials;.
3. The operating system adopts PLC intelligent control and human-machine interface system, truly realize the fully automatic operation process, realize the integration of machine, electricity and liquid; imported seals and hydraulic components; easy to realize the random signal analysis, troubleshooting and all kinds of parameter settings, to ensure that the machine’s working effect.
4. Vibration system by the left and right hydraulic motor instead of motor-driven, in the operation process, hydraulic oil from the pumping station to drive the motor-driven vibration system, to avoid burning caused by frequent start-up of the motor, many times to reduce the power consumption and component loss, so that the equipment performance is more reliable and stable;.
5. Large-capacity cylinder design, so that the molding of brick billets of high quality, compact strength, cylinder size is accurate.
Production line flow and technology
Hollow block production process: electronic batching machine → concrete mixer → belt conveyor → no-burn hollow brick making machine → stacking machine
1. In the production process of electronic batching machine, bulk and granular materials can be fed into the electronic batching machine evenly, regularly and continuously from the silo;.
2. The concrete mixer will add water to the batching materials proportionally and mix them thoroughly;.
3. The belt machine will convey the mixed materials to the storage and fabrication device of the hollow brick making machine.
4. The storage material cloth device according to the requirements of the weighing of the material will be transported to the no-burn hollow core brick making machine material box, in the push-pull cylinder will be full of materials under the action of the mold, to achieve the brick billet pressing molding; 5. the brick billet after demolding, the material will be fully mixed with water.
5. After demolding, the bricks are stacked up by stacking machine, 3-5 layers are stacked up and then transported to the maintenance area by forklift truck.
